ZeroStat ESD Carpet for Static Control

Accessories: Adhesives


GZ-C2000 Permanent Adhesive System

GZ-C2000 Conductive Liquid Flooring Adhesive is a solvent free, one part conductive adhesive system designed for use with Conductive Vinyl and Carpeting. When properly applied this adhesive has excellent seam strength and does not require additional seaming adhesive.

GZ-C2000 is designed for use on, above or below grade, over concrete, wood, old vinyl and metal (but modified installation instructions may be specified for non-absorptive surfaces). This Advanced Polymeric Acrylic features the highest conductive filler to bond strength ratio, and tolerance to cement moisture emissions in the industry.

  • Adhesive: Acrylic Polymer, freeze / thaw stable; @ 5 cycles @ 0 degrees. Non flammable, solvent free with little to no odor. Moisture resistant, mildew resistant, anti-microbial. Working time on non porous subfloors; allow to flash prior to laying material, working time on porous subfloors; lay into wet adhesive. One year shelf life in unopened container.
  • Toxics: VOC emissions 0 grams per liter (calculated per CA SCR 1168).
  • Resistance: < 10 4 Ohm.
  • Appearance: Gray paste with gray and brown fiber.

GZ-C2000 R Releaseable Adhesive System

GZ C2000-R is a high quality acrylic emulsion that combines the excellent performance of a pressure sensitive adhesive with environmental safety characteristics. The GZ C2000-R gives "Total Adhesive Performance". It is non-flammable, non-hazardous and water resistant. It provides a strong, long lasting bond. GZ C2000-R is designed for the installation of dimensional stable vinyl-backed carpet tiles in a release application.

This adhesive can also be used to install approved cushions to recommended substrates in a double glue down applications and solid vinyl/vinyl tile (12" x 12" maximum) in a "tile over tile" installation. Due to its pressure sensitive characteristics, GZ C2000-R eliminates concern about installing a non-porous backed floor covering over a non-porous substrate.

This adhesive contains no hazardous or carcinogenic ingredients as defined by OSHA, Federal, State or Local regulations such as California Prop 65, GZ C2000-R meets all flammability requirements for a Class A Flame Spread Rating as per ASTM E-84.


  • Non-hazardous
  • Excellent Coverage
  • Freeze Thaw Stable
  • Excellent plasticizer resistance
  • Non-flammable
  • Solent-Free


Coverage: 270 sq. ft. on bare concrete
Boiling Point: (°F): 212
Specific Gravity (WATER = I): 1.1
Vapor Pressure: Same as water.
Vapor Density (air=l): Same as water.
Volatile by Weight: 43
pH: 8.2
Appearance and Odor: Gray paste with little or no odor and with black or brown colored fibers.
  Grams Volatile Organic Compunds/Liter of Coating: 0 (Based on no solvent.)
  Grams Volatile Organic Compounds/Liter of Material: 0 (Based on no solvent.)